Enjoy these locomotives and model trains from Marklin.
Wickwar is a small town on the railway line between Bristol and Gloucester. The model railway layout was constructed by the members of the Farnham & District Model Railway Club in N Gauge. The layout is modelled as it was around the early to mid 1950s. As well as local trains, there were many long distance expresses with destinations such as Plymouth, Bournemouth, Manchester, Bradford and Newcastle. Goods trains were mostly to or from Bristol or Avonmouth docks. Motive power was mainly LMR tender locos. To the south-west (left side) the line comes out of a tunnel and along the side of a valley. To the north-east (right side) it starts to cross the valley. All the buildings are scratch built. Next to the tunnel is the large brewery, built by the railway company to replace existing breweries whose water supply the tunnel cut through. At the period modelled, it had become a cider factory which later closed but has now reopened as the “Wickwar Brewing Company”. Each of the two tracks can operate on DC or DCC. The fiddle yard has three roads in each direction, each divided into sections so that 24 model trains can be stored. The backscene was “photoshopped” from photographs of the real location and printed on vinyl. The movement of trains in the fiddle yard is automated using MERG “Train On Track Indicators” (TOTI) detectors which work with both DC and DCC. Points, signals, and the car system are controlled by servo motors; the signals are operated automatically as trains pass. Lorries and buses run along the front using the Faller moving vehicle system.
At Warley MRE Mark Hancock and members of the Yorkshire Area Group of the N Gauge Society presented their modular model railway layout, called “Heworth Sidings”. This model railroad is a fictitious modern image layout and is named after the local area in York. The layout models a twin track overhead electrified main line. The main line is busy and sees a constant flow of freight and passenger movements, the latter being a mix of Intercity and local traffic. The layout is 28 feet by 10 feet and allows to run scale length modern image block trains. Model trains are controlled via DCC. There is a working signalling system which uses track block detection to make sure the correct signal aspects are shown at any time. The main line is operated via computer control: Laptops are despatching and receiving the trains.
This model railroad layout depicts a narrow-gauge railway line in Switzerland. Trains leave the fiddle yard from either the left or right side and have to cross the huge railway viaduct. Many railway lines in Switzerland are built as meter-gauge railways. These are narrow-gauge railroads with track gauge of 1000 millimeters or one meter or approximately 3 feet. In Europe, especially in Germany, the “BEMO” Company is the market leader for scale models of Swiss locomotives, passenger coaches, freight cars and trains in this narrow-gauge scale. The scale is still 1/87, but it’s called HOn3½.
In this video, we are not the train driver, but a passenger. We look out the window and enjoy the train journey along an incredibly large model railway layout. This model railroad depicts heart of Germany’s coal and steel industry, the so-called Ruhr district. The layout was constructed in HO scale and covers an area of more than 420 square meters. On the layout, there are many well-known buildings of this former industrial region, for example, steelworks, blast furnaces and factories.
Pilentum was capturing only some scenes of this superb O Gauge model railway layout. The layout “Central Works” is being shown as a layout under construction, because it is the latest project of the Gauge 0 Section of the Luton Model Railway Club. The layout comprises an industrial scene featuring a car assembly plant. There are two segments: The mainline exchange sidings and the industrial section of the factory complex. Traffic for the factory arrives in the form of raw materials and is exchanged into the works via the industrial locomotives. The location is based on the intense network of sidings that once existed at Longbridge in Birmingham. A feature of this layout is a working coal tippler which provides fuel from loaded wagons to the plant boiler house.
At the great model railway exhibition “Modelspoor Expo” in Belgium, Samuel de Zutter and Wouter de Troyer presented a beautiful model train layout in HO scale, H0 gauge or 1/87 scale. The layout is called “Voorde Dok”, and depicts a dock that could have been located at the old port of Antwerp in the 1950s to 1960s. Samuel de Zutter and Wouter de Troyer are known for their model railroad layouts which usually contain countless details. Nothing comes out of the box. Warehouses and factories are scratch-built and weathered to bring it to a lifelike state. Therefore, the crane, the locomotives, the ships and much more are of course not free of rust. Enjoy this masterpiece of railway modelling which was built by sanding, polishing, painting, weathering and distressing by forming dents and rust, dust, etc.
While watching the first seconds of this video, you will immediately realize that this model railroad layout in N scale is more than 25 years old. This N gauge model railway layout was constructed by a teacher in the 1990’s in Germany. When Hermann Frantz started model railroading, there were neither DCC software nor decoders or track occupancy detectors. Because he had very little space in his apartment, he chose the smallest scale for railway modelling, namely 1/160 scale. He constructed a base plate of 2.6 m x 2.0 m. For using several toy trains on the tracks, he chose the latest model train control system at that time. It was the “MpC System” published by Gahler + Ringstmeier. It is a program for multiple train operations which is running on MS DOS. For laying model railroad tracks, he was using the N Scale FlexTrack made by PECO.
At the great Warley Model Railway Show, Paul Butler presented his superb model train layout built in N scale or N gauge. The layout depicts a fictitious midlands industrial town on a busy cross country route, which is served by local and long distance passenger services. Beside the station for passenger trains, there is a rail served terminal on part of the site of the old goods yard receiving regular trip workings and occasional block loads for onward distribution by road.
Some model railway layouts are so authentically built, so we believe that we are in a real world. The model railroad layout, which is called “Saint Tourbière”, is one of these miniature worlds. This masterpiece of model railroading was constructed by Wim Wijnhoud, a railway modeller from the Netherlands. During discovering this model landscape in HO scale, it feels like we are on holiday in France. This beautiful layout takes 10.5 meters in length and 2.5 meters in width. The landscape is based on a single-track railway line through the Cévennes - a range of mountains in south-central France. The village of Saint Tourbière is a picturesque town, with an old church and with a nice market square. On the market square, there are some bars, restaurants and shops. Down in the valley, the railway station of Saint Tourbière is located. The station has two platforms, a freight yard and a small locomotive depot including a turntable. Model trains arriving and departing at the station, which is located between the mountains, have to cross bridges, tunnels and viaducts.
This modular model railroad layout was built in O scale or gauge 0 by the German model railroader Wolfgang Zörkler. The layout depicts a former narrow-gauge branch line somewhere in East-Germany. Therefore, there are diesel railcars and steam locomotives, for example, the famous “Saxon IV K” locomotive - an eight-wheeled, narrow gauge, steam engine built for the Royal Saxon State Railways. These types of locomotives were built between 1892 and 1921. The model trains commute on a length of ten meters between the two stations “Reichelsheim” (on the left side of the layout) and “Altbrandsleben” (on the right side of the layout). Furthermore, there is a small field railway section with a fully functioning sand loading system. Apart from the rail traffic, there are many, beautiful details on this layout.
Founded in 1981, the Letchworth Model Railway Society is one of the leading model railway clubs in Eastern England. The club’s O scale layout “Mulldale” depicts an industrial scene somewhere in Northern England in the late 1950’s and early 1960’s. Mulldale is a 7 mm or 1/43 scale industrial scene incorporating 16.5 mm track (narrow gauge). The railway serves to move raw materials and goods around the site for the Mulldale Brewery and other small businesses. The model landscape is both kit built and scratch built. The layout size takes 12 feet x 3 feet.
In this video, we are going to discover one of the most impressive model railways which was presented at the great model railway exhibition in Leipzig, Germany, in October 2018. The model railway layout is called “Bad Clausthal” and was constructed in HO scale or H0 gauge by the model railway association Friedrich List Leipzig, Germany. It is a nearly 15 -meter-long railroad layout containing a catenary system or overhead lines on its main lines.
The model railroad layout, called “Mara Harbor”, was built by Martin Welberg. Martin is a well-known model builder and model railroader in the Netherlands. His interests in model railroading or railway modelling are coastal narrow gauge railroads in On30 scale. Some years ago, Martin started building a new modular model train show layout for the famous model railway exhibition OntraX 2014 in Utrecht, Netherlands. His idea was to construct a coastal line railroad layout, including an engine shed and locomotive depot with turntable, wooden bridges as well as a lot of trees and bushes. Of course, a dock or dockyard - also known as a shipyard - should not be missing. On Martin’s superb American themed On30 layout, we see different steam locomotives shunting along the coastal railway line between the fiddle yard on the left and the dockyard on the right. The whole layout, which was presented at the great “Modelspoor Expo 2018” in Belgium, takes approximately eight meters in length. Apart from the rolling stock, we will discover absolutely perfect weathered buildings on Martin’s railway layout. He is a professional in weathering and in the reconstruction of wood structures. By the way, On30 scale - also called 0n30, On 2½ or Oe gauge - is the modelling of narrow gauge railways in O scale on HO gauge track in 1/48 scale ratio by American model railroaders, in 1/43.5 scale ratio by British and French model railroaders and 1/45 by Continental European model railroaders.
This beautiful model railroad layout, called “The Tram of Westerlo”, was built by the Modelspoorclub de Kempen from Belgium. Westerlo is a municipality located in the Belgian province of Antwerp. More than 100 years ago, the municipality had a tram connection, namely the Tram Line 275, which connected Aerschot and Westerlo. This tram line - some say tramway, streetcar or trolley car - was opened in 1911. On the Westerlo market square, there were four tracks in the beginning of the 20th century. The model railway layout is based on photographs from books and postcards about Westerlo. The diorama provides an overview of the houses on the south side, near the market square.
In November 2018, Pilentum Television visited the 26th Warley National Model Railway Exhibition at the National Exhibition Centre in Birmingham, Great Britain, for the first time. Pilentum was overwhelmed by the multitude of the model railway layouts and dioramas. There were more than 90 of the best layouts of British railway modelling and international model railroading in any scale and gauge. As you know, Pilentum Television is from Germany. In Germany we have also large model railway exhibitions, where model railroad layouts are presented. But usually there are about ten or twelve layouts at German model train exhibits. In the Netherlands, for example, there is a larger model train show, namely the “Eurospoor”, where about 30 or 40 layouts are presented. In Belgium, every two years there is the “Modelspoor Expo” with nearly more than 50 layouts and dioramas. However, what Pilentum saw at Warley Show was really one of the biggest, largest, greatest, most beautiful and entertaining exhibitions. Anyone interested in railway modelling should visit the Warley model train show. For those, who could not travel to Birmingham, Pilentum Television made this video documentary on YouTube. Enjoy these 100 minutes of video and find it both interesting and inspiring for your railway modelling.
When Pilentum was at the wonderful model railway exhibition at the NEC in Birmingham, Warley Model Train Show, he was warmly welcomed by the Burgess Hill Model Railway Club and its members of the Thornbury Hill Owners Group. We had a good time playing with the model trains, we filmed many scenes and we made a cab ride video along the main line. The Thornbury Hill model railway layout began life in 1970 as the main OO gauge layout of the Burgess Hill MRC. In March 1986, the model railroad layout was described in the “Railway Modeller Magazine”. The layout model, set in the 1930’s - just prior to the main line electrification - was intended to represent a section of the London Victoria - Brighton mainline. It was not intended to represent a particular station. In 1991 the layout was sold to the present owners, who added the third rail and moved the period forward to the 1960’s, which allows using steam, diesel and electric trains. After the reconstruction, the layout depicts Thornbury Hill station with the four track main line merging into two, a goods yard and a non-electrified branch line. The track is to OO fine scale standards and is hand built; the signals are all operational and interlocked with the points. The station buildings are based on London, Brighton & South Coast Railway designs, with the canopies copied from East Croydon and the signal boxes based on the prototypes at Eastbourne and Seaford. On the model railway layout there is an intensive service of main line and suburban electric trains supplemented by steam or diesel hauled goods, parcels and special trains. The layout requires eight operators and requires a space 41 feet by 9 feet in total.
In 2008 this superb model railway layout was opened in the city of Oberhausen, located directly in the heart of Germany’s coal and steel industry, the so-called Ruhr area. Then, this permanent model railway exhibition represented cities, landscapes, steelworks, coal mines and the rail transport in the 1970‘s. The model railroad layout was constructed in HO scale or H0 gauge and covered an area of more than 420 square meters. Due to financial problems, this model railroad exhibit was closed two years after the opening. Fortunately in September 2012, this large model railway layout was sold to a new owner, who re-installed the whole layout and made it accessible to visitors again. Today, this fine layout is a part of the railway museum, called „Modellbahnwelt Odenwald“, located near Frankfurt/Main, Germany. The miniature world was built according to original track plans, stations and landscapes, for example, the Oberhausen central station, the port of Dortmund, the blast furnace plant of Oberhausen, colliery and coking plants. On the layout, there are many replicas of well-known buildings in the Ruhr area. Furthermore, a special highlight is the photorealistic background system of the model landscape. The model railroad was designed as a two-wire digital system, which is used by model trains of Fleischmann, Roco and from many other manufacturers, except Märklin. Locomotives, light effects and trains are managed by the digital model railway control system „TrainController“. Enjoy Pilentum’s train journey of at least 80 minutes on a several kilometers long track system.
This modular model railway layout in HO scale was constructed by the German model railroader Dr. Franz Rittig. The layout depicts a former narrow-gauge branch line, which was operated in the 1960’s at the time of the Deutsche Reichsbahn (German Reich Railways). The model trains commute between the two stations “Franzburg” and “Friedrichsruhe”. On the layout there are Prussian steam locomotives, class T9 of the Prussian State Railways, later incorporated into DRG Class 91, and a diesel railcar, type VT 135. Buildings, elaborately weathered, were taken from Auhagen and Kibri. The rolling stock was made by Fleischmann (steam locos) and by PMT manufacturer, Germany.
At Warley Model Railway Show in 2018 the Somerset Railway Modellers Club (SRMC) presented its beautiful model train layout in O gauge, 7mm scale or O scale. The model railway layout depicts a branch line which terminates at one of the many ubiquitous seaside towns found along the coast of Great Britain. This initially independent line was opened in 1855 by the Gorbriton and Wilsea railway company. The branch was 15 miles long beginning at Gorbriton Hill station, continuing through, Wilsea and Holbeach stations before ending at a connection with the Midland main line. Up to its demise under the Beeching Axe in 1966 Gorbriton Hill was a mecca for railway enthusiasts as it was uniquely placed, being a terminus for Great Western, Southern and Midland passenger and freight traffic. By the way, the “Beeching Axe” was a reduction of route network and restructuring of the railways in Great Britain. In reality of course Gorbriton Hill is a fictitious town, as is the associated branch line. The name Gorbriton is in fact an amalgam of three letters from the names of Gordon, Brian, Tony and Bill who are all members of the Somerset Railway Modellers Club. Nevertheless the model railroad layout has been built to fulfil two important criteria, to be of interest to the viewer and to run a range of rolling stock. The layout shall give an impression of the atmosphere that would have existed between 1932 and 1965 on the Gorbriton branch line. While watching this video, please note the unique scale model of the famous Leader Locomotive. The Leader was a class of experimental steam locomotive, produced in Great Britain to the design of the innovative engineer Oliver Bulleid. The Leader was an attempt to extend the life of steam traction by eliminating many of the operational drawbacks associated with existing steam locomotives. The design incorporated many novel features, such as the use of thermic siphons, bogies and cabs at each end of the locomotive, resulting in its unique modern diesel-like appearance. Unfortunately, the project was cancelled in the early 1950s. Five Leader locomotives were begun, although only one was completed. After all, this locomotive was being scrapped by 1951.
The model railway society, called “Artevelde Miniatuur Spoorweg Amateurs Club” (AMSAC), located in the city of Ghent, Belgium, is one of Belgium’s leading club in rail transport modelling. For building their latest HO scale model railroad layout the members were inspired by the railway station of the city of Tilff in Belgium. If you are using “Google Earth” or “Google Maps”, and if you are looking for the train station in “Tilff” in Belgium, you will see a very special building, namely a huge protective wall, directly located beside the main line near the river. This double-track railway line and the wall at the railway station are the focus in this model train layout. Therefore, the French speaking members of AMSAC call their model railway layout “LeMur”, meaning “The Wall” in English. The HO club layout was built especially for model train exhibitions. The layout has a length of about ten meters and depicts the main line along the river Ourthe in the Ardennes in Wallonia, Belgium.
The Leamington & Warwick Model Railway Society presented its OO gauge or 4mm/ft scale club layout at the great Warley National Model Railway Exhibition 2018. The model railway layout is made up of ten 2 feet x 4 feet plywood baseboards giving an overall dimension of 16 feet x 8 feet. The mainline and branch leave their fiddle yards and curve round into the main station area, passing the engine shed, turntable and LT storage sidings on the right. The station has one bay platform with a run round, two through platforms and a loop platform which normally serves the branch but can hold other down trains to let express trains pass. Behind the branch platform is a small three road parcels and sundry goods depot. The two track main line leaves the station and curves back around into the fiddle yard. Track is a mixture of flexible track by Scale Model Productions Marcway and copper clad construction points and crossovers - all Code 75. Signalling is a variety of colour light and semaphore. All points and signals are electrically remote controlled. During the past twelve months the members of the Leamington & Warwick Model Railway Society have completely rewired the model railroad layout and it now operates under the MERG electronics system, which has enhanced the operational reliability of the layout immensely. The model train layout can also operate under DCC control to further display the versatility of the Model Electronic Railway Group (MERG) system. The miniature world of Duxbury Station is loosely based on Aylesbury in 1960. Aylesbury was the one time terminus for the Metropolitan Railway trains from Aldgate, Liverpool Street and Baker Street with a bay being provided for the purpose. These trains were electrically hauled to Rickmansworth where a BR locomotive would take over. However, with the extension of electrification to Amersham, the Aylesbury service was discontinued in the early 1960's. During railway modelling the club layout the members imagined, that London Transport extended the 3rd and 4th rail all the way to Aylesbury. This way on the club layout are running both electrically hauled LT trains using the famous Metropolitan Bo-Bo's as well as the Underground units. Furthermore, there are steam trains, albeit in BR guise, as well as diesel and electric trains.
When Pilentum visited the great Warley National Model Railway Exhibition 2018, he met John Dowrick presenting his first ever layout built in N Gauge or N scale, which he called “Haversham Central”. In reality, Haversham is a tiny village where John lives, near to Milton Keynes and very close to the west coast mainline. His layout depicts a fictitious city, set loosely in the early 1960s. The layout is a DC operation and shows just how much can be achieved in such a relatively small area, because the layout takes 5 ft x 2 ft x 9 inches. Despite the size, “Haversham Central” successfully depicts a very busy city setting with model trains coming and going from various parts of the country, for example, the blue Midland Pullman, Golden Arrow and even the Brighton Belle. Behind and near the station, there is also the opportunity to do some shunting in both the goods area and the engine sheds.
Hubert and Laurent Bertrand are two model railroaders from Alsace, France. They are father and son, and great enthusiasts of miniature trains, for example, steam locomotives, electric locomotives or diesel locomotives. In the last years, they constructed a modular model railway layout in HO scale, which is called “Le Train de la Moder” in French, meaning something like “The Train of the River Moder”. Without any doubt we can point out by watching the architecture of the buildings, that the model landscape is based on the valley of the Moder, a small river near the river Rhine, in the north of Alsace, France. The construction of this model railroad layout began more than ten years ago, when Hubert Bertrand inspired his son Laurent in railway modelling, model railroading and model making. The design of their modular model railway based on a dog-bone layout. It is built in eight removable elements and transportable segments with a full length of approximately 13 meters. These modules are made of cleats and plywood. The model landscape is made from wire mesh coated with plasterboard glue. Furthermore, products - made by manufacturers Noch, Heki and Busch - were used for landscaping. In this miniature world, there are an Alsatian village, a viaduct, tunnels, a traditional architecture with half-timbered houses and pink sandstone of the Vosges and much more. All the buildings are made by hand. There are also 30 meters of rails in HO scale for different locomotives circulating on the railway lines.
This model railway layout in TT scale was constructed by the club “Modelleisenbahn Freunde Köln” (Model Railway Friends of Cologne), a German model railroader association. Within the association, a special department has emerged, called the “Modellbau-Team Köln” (Railway Modelling Team Cologne). This team has focused on the construction of model railroad layouts, which are shown at model train shows and model train exhibitions throughout Europe. The team’s TT gauge layout takes an area of about eight meters in length and four meters in width. The layout can be viewed by visitors both from the front and from the back. Due to the separation of front and back two different landscapes can be represented, namely on the one hand a rural part with a single track railway and a small station and on the other hand an urban shaped part with a large central main station and electrified main line. In addition, there are imposing railway bridges. Today, TT scale is a niche model railroading scale, whose name stands for “table top”. Its 1/120 scale and 12 mm gauge sizes it almost halfway between HO scale and N scale. Model trains in TT scale retain a comparatively small niche in the United States and in the United Kingdom, but it is the second most popular scale in the former East Germany, in Eastern Europe and Russia. Currently Tillig is the largest company to make TT scale rolling stock. Most TT scale track today is also made by Tillig Company, which offers both standard model railroad track and an integrated roadbed track. By the way, the Russian Company Peresvet (Russian: Пересвет) is another manufacturer, who produces TT scale models, mostly Russian train sets. Also the German manufacturer PIKO has started with a TT line, focusing mainly on German stock, and Arnold - the subsidiary of Hornby Railways - offers TT scale models.
Pilentum really likes the very large o gauge model railway layout at the Transport Museum in Dresden, Germany. The model railway, the landscape and the rolling stock contain so much history because the railroad system in O scale was originally used by East German railway engineers as a training area. Some locomotives are custom-made. They are absolutely unique. Let’s discover this model railroad layout which takes nearly 325 square meters. Please, listen to the authentic sound when trains pass by.
The basic framework of the model railroad layout, which is called “Karlsberg”, consists of 16 mm thick blockboard panels. The rails are laid on a 3 mm cork track bed or cork rail bed made by Tillig Company, Germany. In total, there are 105 meters of Roco rails and Peco tracks. Railway signals and Semaphore signals are made by Viessmann Company, Germany.
This model railway diorama was built by the model railroaders Rik Martens and Koen Vermeulen in 1/32 scale. The layout was inspired by the Rugby locomotive testing station in the United Kingdom.
Because of the special meaning of the Petite Ceinture for the city of Paris, François Joyau built a small piece of this circular railway in HO scale. His model railway layout, named “57 bis Rue Eiffefe”, takes about 200 cm x 60 cm, and depicts beautiful weathered buildings, backyards and streets.
This model railway diorama is called “Albion Yard”, and it represents a railway yard somewhere in Great Britain.
This miniature world of model ships, model boats or model shipways was constructed by the Shipbuilding Club MBV Hofstade, Belgium. This diorama is called “Omaha Beach, Normandy, June 1944” and depicts the famous Omaha Beach after the military conquest by US troops in World War II.
Ivo Schraepen is a very famous rail transport modeller from Belgium, who specializes in the construction of very large model railway layouts in HO scale. He is present at every big model railway exhibition in Europe, and presents his exceptionally beautiful railroad layouts.