Superb scale model of the double-deck rail and road bridge crossing the river Moselle at Bullay, Germany. This bridge, called “Moselle Bridge Bullay”, is located near Coblenz and Trier, and it is Germany’s first combined railway and road bridge, built between 1875 and 1878. Its total length is 957 feet or 314 meters. Rainer Tielke, a model railroader and model railway enthusiast from Germany, constructed a true to original replica of this bridge in 1/220 scale, also known as Z scale or Z gauge.
This is the model railway layout of Mr. Hans-Peter Porsche. It is a permanent model railroad exhibition in Southern Germany, called “Traumwerk Porsche”. The model trains layout was built in HO scale and has an exhibition area of more than 400 square meters. In this video Pilentum Television presents all railway lines and track sections from the driver’s point of view (cab ride). We will experience Austria, Switzerland and Germany as well as mountains, bridges and valleys.
This small and beautiful model railroad layout was built by the German model railroader Heinz-Ulrich Grumpe. It is a narrow gauge H0 layout; also known as HOn3 scale. The diorama has a size of 80 cm x 40 cm. The terrain was formed from Styrodur plates. Code-55 rail profiles (1.3 mm) were used for the tracks. The steam locomotive and diesel locomotive are operated in the same way with a speed controller in analogue mode. The switch frogs are polarized so that a continuous voltage supply is always guaranteed.
Purgatory Peak is an on30 scale layout which was built by the members of the Macclesfield Model Railway Group, Great Britain. It is a first attempt at American on30 gauge layouts by British steam enthusiasts.
The model railway layout which was built by Bill Roberts from Great Britain, attempts to capture the scene at the former railway station “Marx Engels Platz”, today called “Hackescher Markt”, which is situated in former East Berlin between “Alexanderplatz” and “Friedrichstrasse” stations. The situation, shown on the model railroad layout, reflects the time after the fall of the Berlin Wall in spring 1990. Since the fall of the Berlin Wall, in this corner of former East Berlin little has changed. There is evidence of the decay of the former capital of the German Democratic Republic.
Although we see German model trains running on this model railway layout, this modular model railroad layout was built by model railroaders from the Netherlands, namely by Ton van Dijk, Ton Huijink, Erik Dikken and Michel Turlings, who are members of the model railway club “MaasBuurtSpoor”. The club members call their layout just “De Duitse Modulebaan”, which means “The German Modular Railway” or “The German Modular Railroad”.
In the city of Rotterdam in the Netherlands, there is a very famous railway bridge. The bridge is called “Delfshavense Schiebruggen”. This railway bridge is a double steel drawbridge with a clearance height of seven meters. Normally, the bridge only opens at night, so that train traffic is not disturbed by shipping during the day. Because this railway bridge is a landmark in the area of Rotterdam, this bridge was a challenge for a new model railway layout for the members of the Dutch model train club “MaasBuurtSpoor”. The model builder Mike van Raaij has carefully designed this model railway layout in HO scale. The detailed landscape on the model railroad layout has been reconstructed almost in perspective. Although there are even cyclists, boats and other loving details, the focus is on the railway bridge. The bridge consists of two leaning drawbridges lying next to each other. These drawbridges are placed diagonally across the railway line. However, the model bridge has the same functions as the original bridge. The model trains are controlled by a digital computer system. The train control is realized by the program “Koploper” and the block detection circuits are based on an S88 system.
This model railway layout was built by a model railroading club from Dresden, Germany. In East Germany the TT scale was very popular for model trains - both today and then. Therefore, the members of the club decided to rebuild an old branch line in the former Prussian province of Pomerania in TT scale. Once, this Prussian railway line was called “Franzburger Kreisbahnen”. The special feature of this model railroad layout is the rolling stock: Originally this Prussian railway line was not constructed in narrow gauge, but in meter gauge. Therefore, the main problems on railway modelling were the steam locomotives, because there is no rolling stock in meter gauge for rail transport modelling in TT scale. Locomotives which were built as N scale models were reconstructed to locomotives in TT scale meter gauge. The construction of the modular model railway layout started in 2014. While the landscape was rebuilt on the basis of old files and old photos, locomotives and railway cars had to be reconstructed from N scale to TT scale by hand. However, some freight cars and passenger cars were converted from TT gauge (narrow gauge) to TT gauge (meter gauge). On the modular model railway layout we can discover a typical East German atmosphere. There are small train stations, farms and even a light railway. The whole scenery presents Pomerania in the past. The abbreviation “DR” on steam locomotives and railway wagons means “Deutsche Reichsbahn”, i.e. the railway company in Germany before the Second World War or the railway company in East Germany.
This amazing model railway diorama in Z gauge was built by the German model maker Claudius Veit. The layout presents a model railway intermodal freight terminal, and occupies an area of just 160 cm x 60 cm. There is a lot of electronics: Digitally controlled model trains, locomotives with sound effects, moving trucks and cars, mobile gantry cranes and a lot of lighting effects. The rolling stock is made by the manufacturer Marklin. The four cranes, which were originally designed for N gauge model railways, are made by the manufacturer BRAWA, but have been completely revised by Claudius Veit. The street lights are from the LED assortment of Kokologgo Company and Evemodel Company. Finally, the model train layout is equipped with a photo background.
In this video, we are going to discover an old tinplate model railway layout with power supply on a center third power rail. There are toy trains or model trains by the manufacturers Lionel, Bing and Marklin. The trains were produced between 1930 and 1950. The model railroad layout has a size of 12 meters x 3 meters. While HO scale and N scale are the most popular model railway standards of today, O gauge or O scale arguably remains the most popular toy train standard. O gauge trains represent a variety of sizes: O gauge track happens to be 1/45 the size of real-world standard gauge track, so manufacturers in Continental Europe have traditionally used 1/45 for O gauge model trains. British manufacturers rounded this up to 1/43, which is seven millimeters to the foot. Manufacturers in the United States rounded it down to 1/48, which is a quarter-inch to the foot. In the first half of the 20th century, the earliest toy trains were made of tinplate because technological advancements in materials and manufacturing allowed tin to be stamped, cut, rolled and lithographed faster than ever before. For example, Germany was the major producer of tin toys in the world in the early 20th century. The production of tin toys was discontinued during World War II because of the need for raw materials in the war effort. After the war, tin toys continued to increase in popularity but between 1950 and 1960 cheaper plastic ended the reign of tin toys. Furthermore, it was during 1950 and 1960 that the modern emphasis on realism in model railroading or railway modelling started to catch on. Since then, trains have no longer been called “toy trains”, but “model trains”. However, some adult fans of toy trains operate their trains, while others only collect.
Samuel de Zutter is a famous rail modeller from Belgium. He has always been interested in car wrecks and scrap, so he decided to build a very messy model railway layout. He wanted to make a layout to do lots of switching with small diesel and steam locomotives. The track plan consists of two main tracks with a side track to the scrapyard where the switching takes place. After the scrapyard, those two tracks pass by an abandoned clay digging site, turned into a pond. On the model railroad layout, there is also a factory for car tyres. A loading dock next to the track provides the factory with resources and allows for the produced tyres to be transported by rail. All buildings have been built by hand. Samuel de Zutter spent a lot of time in detailing the interiors and little corners with all sorts of rubbish lying around.
This N gauge model railway layout represents the North Eastern Region’s Durham Coast mainline, somewhere around Easington in the late steam period. The British railway modeller Les Richardson, member of the Bingham Model Railway Club, has built this layout. The old Hawthorn Dene Colliery no longer winds coal, but it is still in use, mainly preparing household coal for merchants and for the nearby landsale yard. Colliery locomotives bring empties from the exchange sidings to the south for weighing and taking on to the screens, while full wagons are removed from the screens, weighed and taken to the exchange sidings. Buildings are typical of the area, though not modelled in the right places realative to each other. The layout is digitally controlled, using NCE Power Cabs. The semaphore Signal is by Dapol.
Don't play with steam locomotives or you'll fall in love !!!
Steve Farmer wants to show us, how even the smallest space can be used for a model railway layout. His amazing layout, called “Lymebrook Yard”, is built on a single board with a size of just 4 x 2 feet and shows, what can be done if you are pushed for space. The layout is set in the late 1970s early 1980s with the location just north of Newcastle Under Lyme and is situated on an imaginary railway line between Newcastle and Crewe. On the model railroad layout, it is continuous run with the fiddle yard being dead end sidings that go under the scenery. Model trains consist of local DMU workings to trip workings to the yard and through freight workings. The trip workings to the yard arrive and depart with the train loco undertaking any shunting required. Track work is by PECO and is both code 80 in the fiddle yard and code 55 on the scenic section. The layout is analogue controlled with points operated by Gaugemaster SEEP point motors. The fiddle yard is operated by hand.
High-speed trains or high-speed rail is a type of rail transport that operates significantly faster than traditional rail traffic, using an integrated system of specialized rolling stock and dedicated tracks. One of the most famous high-speed trains is the “Tōkaidō Shinkansen” bullet train in Japan. In this video, we are going to discover a Japanese model railway layout in N scale presenting high-speed model trains made by KATO. Furthermore, there are authentic buildings, vehicles and landscapes from Japan.
This award winning model railroad was constructed by the two well-known model railroaders Leo Bettonviel and Walter Huijboom from the Netherlands. They call their HO scale modular layout “The Sodumb & Gamorrah Mining and Navigation Company”. The model railroad layout depicts an old forest railway line on Vancouver Island in the twenties and the thirties of the last century. A forest railway, forest tram, timber line, logging railway or logging railroad is a mode of railway transport which is used for forestry tasks, primarily the transportation of felled logs. Vancouver Island is in the northeastern Pacific Ocean, and it is part of the Canadian province of British Columbia. In the last century in the mountains of Vancouver Island, ore was found, and the railroad was used to transport the ore from the mines to the coast, where it was shipped for further processing. In addition, also wood was transported by rail to the harbor. As with many mountain railroads there are tracks along rivers, over bridges and in curves through the mountain valleys. The rolling stock and the locomotives must be able to withstand all possible conditions and obstacles along the way, for example on steep slopes and in sharp bends. Therefore, geared steam locomotives are in use. This type of steam locomotive uses gearing - usually reduction gearing - in the drivetrain. This gearing is part of the machinery within the locomotive and should not be confused with the pinion that propels a rack locomotive along the rack between the rails. The geared steam locomotives are built for conventional tracks; famous types are the Shay locomotive, the Climax locomotive or the Heisler locomotive.
Richard Harper, a model railroader from Great Britain, had the idea to rebuild the terminus of an 8 1/4 mile branch line in Sidmouth, a seaside town in East Devon. Originally, trains ran on the former London and South Western Railway (LSWR) main line from Sidmouth Junction to Sidmouth. The line was opened in 1874. The model railway layout represents Sidmouth as it was operated by British Railways in the late 1950’s. During this period there have been around 15 trains each way per day. Freight workings were generally limited to coal, agricultural and building products. At the Warley Model Train Show Pilentum made a beautiful cab ride directly into the terminus.
In this video, we are moving back to the most beautiful era of the German State Railways. Back in the 1980's when there were still some steam locomotives and a lot of diesel locomotives in operation. Our journey begins in a locomotive shed with a turntable. We accompany model trains with a gliding camera during the ride. We also see some funny and frivolous scenes in this model landscape. In this miniature world there is no train station, but there is a scrap yard. There are everyday scenes, somewhere in the neighbourhood, and a motorway, where an accident happened, and much more. Again and again, the large locomotive shed is the focus of this video, because we see a lot of well-known German locomotives there. Enjoy 38 minutes of railway modelling in Germany.
Network SouthEast (NSE) was one of the three passenger sectors of British Rail formed in 1982. NSE principally operated commuter trains in the London area and inter-urban services in densely populated South East England. The railway sector was also known as London & South Eastern. The British railway modeller Ian Blackall constructed a 4mm OO gauge model railway layout presenting the village of Tidworth and its station. A lot of model trains by NSE serve the Tidworth station. For example, there are freight trains for the SWITCH warehouse at Tidworth or passenger trains arriving at the station.
Railway modeller Alastair Knox presented his beautiful model railway layout, which is called “Bridgford”, at Warley MRE. Bridgford is a “watch the model trains go by” type of layout set in the late 1930’s on the London, Midland and Scottish Railway (LMS), a British railway company. The object is to run trains which are not out of proportion to the scenery, and which are as near as possible to the prototype in make-up and length. The “Bridgford” model train layout is not new, but already several years old. It was presented in the magazine “British Railway Modelling” (January, 1998) and “Railway Modeller” (June, 2014). Controllers are from AMR Electronics Company. Turnouts are fitted with PECO motors. Locomotives are kits or heavily modified. The coaches are marshalled as nearly as possible in the correct formations for the late 1930’s. Goods stock is the usual mixture of scratchbuilt, kits, modified proprietary and straight out of the box. Some of the goods stock is fitted with DG couplings for shunting. Most of the buildings on the layout are from the SD mouldings range, the rest are either products of “Ratio Plastic Model Kits” (PECO) or scratchbuilt. Signals are Ratio with Model Signal Engineering (MSE) arms. A feature of this model railroad layout is the beautiful railway viaduct. The viaduct etchings are by courtesy of Mike Raithby of the Manchester Model Railway Society, construction being in brass.
When Pilentum was at the great Warley Model Train Show in Birmingham in 2018, he saw so many beautiful model train layouts that he did not know what to film. Therefore, Pilentum was capturing only some scenes of this superb OO gauge model railway layout including model trains made by Hornby Railways. It is the modular show layout presented by the Hornby Magazine. The layout consists of a great shunting yard on the left, of a rail crossing on the right and a fiddle yard in the background.
The model railway layout, which is called “New Bryford”, had previously been exhibited in the late 1990’s and after a change of ownership it has returned to the original model builder. The layout, built in OO gauge or 4 mm scale, has been extensively refurbished including a new, deeper backscene and conversion to Digital Command Control (DCC) operation via a Lenz 100 system. Peco Code 75 track is used in the scenic section and Peco Code 100 in the storage yards. Switches or points are equipped with Peco point motors - all have been fitted with extra switches to improve electrical reliability. The model railroad portrays the railway scene within the Manchester, Wigan and Bolton area in Great Britain. Passenger traffic, for example, is varied from Northern Rail diesel multiple units (DMU) to Voyagers on Anglo-Scottish duty and occasional Pendolino trains. Freight traffic is equally varied, for example, there are DB Schenker, Freightliner, Direct Rail Services and Colas Rail all having regular workings through New Bryford. The DCC system enables to control each item individually including lights and sound. Much of the rolling stock was modified, repainted and renumbered by Mick Bryan and Peter Taylor. Normally, ready-to-run items from all the major manufacturers are in use. But there are a few kit and scratchbuilt items to add further variety.
The model railway layout is set in southern Sweden, on the shores of Lake Vättern in Västergötland. It is the lakeside terminus of the “Ulvaryd Mjölltorp Railway Line” (Ulvaryd-Mjölltorp Järnväg), a narrow gauge railway connected the small lakeside town of Ulvaryd with the main line from Skövde to Karlsborg. These Swedish railway lines were built in the early 20th century. The narrow gauge lines existed until the 1950s. All are now closed. The model railroad layout made by Charles Insley in HO scale is fictitious.
Ebsworth Street is the name of a modern image model railway layout that was built by the members of the Beckenham and West Wickham Model Railway Club. It is a 4mm scale or OO gauge layout for the exhibition circuit. Ebsworth Street recreates a small main line terminus station with three platforms running from London via the main line. Beside the railway station with a main road leading to town centre, there is a train care depot with locomotive sidings. The model train layout is DCC operated by Lenz 100 Control System and MRCCC (Model Railway Computer Control Centre).
This model railway layout in 1/24 scale is set in the 1970’s and depicts a small Uranium mine somewhere in the Canada. The diorama was presented as minimum gauge micro layout at the Warley Model Railway Exhibition. Although the layout is not based on an actual mine, Nick Wright has tried to capture the industrial “run on a shoestring” look and feel of a typical mine of this size. Generally, these minimum gauge or micro layouts are small model railways, usually less than three or four square feet in area, that have a clear purpose and offer a degree of operating potential.
Malcolm Goodger calls his model railway layout “Priory Lane”. It is an N Gauge layout, which can be classified as a micro or minimum space layout measuring only 4' 6" x 1' 6" with an operational area of 3' 0". Priory Lane is a small country station in Great Britain with limited goods facilities which was originally a through station on the East West Line connecting with the terminus at Priory Hill to the West of the village.
The model railway layout that was built by Norman Jones in N scale is set in the mid 1970’s to early 1980’s, and portrays a secondary main line incorporating a branch line junction station and river crossing. The layout is called “Blue is the Colour” and was completed in 2014 and featured in the magazine British Railway Modelling (BRM). In addition, it has appeared in the magazine “Model Rail’s Great British Layouts” in 2017 as well as the British journal of the N Gauge Society. The rolling stock consists of British Railway trains, locomotives and passenger coaches.
This model railway layout was built by the members of the Modelspoorklub van de Kust (MSKK). It is a Marklin model railway (3-rail system). The layout is about the German region of Thuringia at the beginning of the 20th century. Then, it was the great era of steam strains and steam locomotives. The layout is constructed as a modular model railway layout of nearly 8 x 5 meters. The model trains are controlled by the “Koploper” software.
The “Furka Cogwheel Steam Railway” is a largely volunteer operated heritage railway which operates a partially rack and pinion-operated line across Switzerland. Culminating at 2,160 meters, above sea level, it is an old mountainous section of the “Furka Railway” that was abandoned after the construction of the Furka Tunnel. It has been gradually brought back into service with the use of steam and diesel locomotives, with the entire line completed in 2010. On the model railway layout, we see - amongst other things - the famous railway station of Gletsch. It is a nearly realistic replica of the buildings and railway tracks. Furthermore, we can discover some other sections of the “Furka Railway”, for example, the “Steinstafel Bridge“ or the “Steffenbach Bridge”. All model trains are made by BEMO. In 1/87 railway modelling scale, these narrow-gauge railway lines of Switzerland are called “H0m scale” with a track gauge of 12 mm.
This superb model railway diorama in scale 1/43 was built by the French model railway club, called “Club de Modélisme de St. Michel sur Orge”. Some members of this railway club have a passion for field railways, industrial railways and narrow-gauge railways. Therefore, they decided to build a former paper factory from East Germany. The focus is on the rails and locomotives which are using the industrial railway lines in front of the factory. Locomotives are perfectly weathered. Additionally, there is a catenary. On the industrial site, there are also the typical old vehicles from East Germany.
The Rhaetian Railway (RhB) is a Swiss transport company that owns the largest network of all private railway operators in Switzerland. The RhB operates all the railway lines of the Swiss canton of Graubuenden. Inaugurated in 1888 and expanded from 1896 onwards in various sections, the Rhaetian Railway serves a number of major tourist destinations, such as St. Moritz and Davos. On the model railway layout, we see the RhB station in Alp Gruem, Swiss landscapes and model trains made by BEMO. All Rhaetian Railway lines are 1,000 mm (3 feet 3 3⁄8 in) metre gauge wide and electrified. In 1/87 rail transport modelling scale, these 1,000 mm railway lines are called H0m or HOn3½ with a track gauge of 12 mm (0.472 in).
This superb model railway layout was built by Rudi Nelissen. The layout is called “La Roche-en-Ardenne” (Porphyry Quarry), and depicts the beautiful landscape of La Roche-en-Ardenne, a Walloon municipality of Belgium located in the Ardennes. The rolling stock in HO scale consists of tram engines (steam dummy or dummy engine), steam tramways and steam locomotives, which were used for transportation in Belgium in the last century. Furthermore, Rudi Nelissen built a porphyry quarry on the right side of the model railway layout, where the typical cobblestones in the Ardennes were produced. There are several steam-cranes that were used in the quarries at that time. These cranes are self-built in brass and are fully functional. Apart from that, it's a beautiful landscape modeling.